logo
Most Viewed Last 7 Days
Spectrian 180W Amp *** (336)
436MHz DATV Up-Converter (245)
146MHz RD06+RD15 Amp (98)
23cm DG0VE Amplifier (91)
EME in 2007 (84)
Summer Fun ATV 2008 (84)


Cluster Activity

Spots per uW band today:
UK spotter or spotted only.

Solar data:
SFI
71
A-Index
8
K-Index
3
Exp.K
1
Sunspots
13
Activity
qui
GMF
qui
Aurora?
no

My Weather

Date:17/01/18 Time:17:56
Temp:3C
Wind Speed:10mph
Wind Dir:202deg
Pressure:998.74mB
Humidity:118%
Dew Point:6.6C
UKHASnet
12:6 Audio Mixer - Testing

Continued from Part1

So.. i spent a day mounting all of the boards/connectors in a 1U case to make it a little easier to test.
An arduino nano has been mounted in the box for now, this will be used to interface to my pc for testing purposes, normally the raspberry pi will connect directly to the mixer.

Back panel



Inside



A small sketch was written for the arduino to pass on the config bits to the FPGA from the pc via usb.
A GUI was written in C# (my fav way to create gui these days!) to send the control to the mixer via the arduino.

Here is what you get and so far all seems to work as expected :-)

Control Test GUI



The list next to the output sliders is used to select what channels are mixed to that output, blue are active.
The input levels do not effect the squelch threshold.

Maybe next i should look at actual gain levels in dB etc.. tbc










Last page added:07/01/18 10:15
M0DTS.co.uk